2.0t FSI engine specs
2 posters
OddUnit :: The Workshop :: Engine
Page 1 of 1
2.0t FSI engine specs
Anyone know the block height of a 2tfsi ie 220mm 236mm etc and also what length rods are used and pin diameter?
[mod edit]Split this off as a separate thread. Beigy.
[mod edit]Split this off as a separate thread. Beigy.
ctwg60- .:Stroked:.
- Number of posts : 770
Re: 2.0t FSI engine specs
Sort of given up on this but I think 144mm and 220mm is probably the answer knowing VW.
ctwg60- .:Stroked:.
- Number of posts : 770
Re: 2.0t FSI engine specs
I dunno, I reckon 236mm and 159mm is more likely, as that was the ABF specs and that offered better stroke to rod ratio...I could be wrong thoughctwg60 wrote:Sort of given up on this but I think 144mm and 220mm is probably the answer knowing VW.
Re: 2.0t FSI engine specs
I reckon as they don't need to accomodate low comp pistons and they have all that balancing stuff to accomodate they went 144 220.
ctwg60- .:Stroked:.
- Number of posts : 770
Re: 2.0t FSI engine specs
Well, so far I've found the bore and stroke, and that doesn't really help...
82.50 mm × 92.80 mm
82.50 mm × 92.80 mm
Re: 2.0t FSI engine specs
Well, I found a forged piston for sale for the FSI 2.0T that gave the rod length and pin diameter, and I was completely wrong Its the same as the 9A, 6A etc. 144mm rod length with 20mm pin, thus the block height is likely to be 220mm
Linkie for your pleasure...
Linkie for your pleasure...
Similar topics
» 16 V cam specs
» Nissan Pulsar GTi-R Turbo Specs
» Which engine is best?
» Engine Loom
» Shaky engine....
» Nissan Pulsar GTi-R Turbo Specs
» Which engine is best?
» Engine Loom
» Shaky engine....
OddUnit :: The Workshop :: Engine
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|