oil filter brackts
2 posters
OddUnit :: The Workshop :: Engine
Page 1 of 1
oil filter brackts
Some oil filter brackets have a spare thread in them so you can mount an oil pressure sender for instance.Which oil filter brackets would be a direct swap for the g60 one?
Anyone?
cheers.
Anyone?
cheers.
dirtytorque- .:Charged:.
- Number of posts : 1101
Re: oil filter brackts
the g60 1 will be the same fitment as all 8vs.
Flusted- .:Cammed:.
- Number of posts : 230
Age : 44
Location : Isle of Wight
Re: oil filter brackts
ok, any of the other 8v's have a spare thread in its oil fileter bracket?Flusted wrote:the g60 1 will be the same fitment as all 8vs.
ta.
dirtytorque- .:Charged:.
- Number of posts : 1101
Re: oil filter brackts
what you after a spare port for? cant you just use a g60 oil line adaptor as that gives you a spare as its like a t- piece
Flusted- .:Cammed:.
- Number of posts : 230
Age : 44
Location : Isle of Wight
Re: oil filter brackts
and if your after a feed for the charger, take it from the back on the 16v head as presure at the filter housing is too high and can blow the charger seals
Flusted- .:Cammed:.
- Number of posts : 230
Age : 44
Location : Isle of Wight
Re: oil filter brackts
No,it's for my oil pressure guage.My previous adapter fitting will not go on now because of the engine breather assy.
I thought a different bracket would be a nice solution.
I thought a different bracket would be a nice solution.
dirtytorque- .:Charged:.
- Number of posts : 1101
OddUnit :: The Workshop :: Engine
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|